background image

Instructions – Parts List

GRACO INC.

P.O. BOX 1441

MINNEAPOLIS, MN

55440–1441

Copyright 2002, Graco Inc. is registered to I.S. EN ISO 9001

Power Caulk

t

Air Powered

Caulking Gun

Graco Power Caulk

t

 guns are made with heavy duty, all metal construction. They

use on-demand, regulated air power to provide fast, consistent, and smooth

application of adhesives and sealants. Regulated air pressure dispenses in a

smooth, even bead. These guns feature an instant exhaust valve to prevent dripping

or stringing when the trigger is released.

Model C27098 

100 psi (0.7 MPa, 7 bar) Maximum Working Pressure

This gun accommodates a 10-oz. (.3 l.). plastic or fiber cartridge. A bayonet lock

makes for fast and easy attachment of the cartridge. A lightweight cast aluminum

handle gives you variable dispense rates depending on air pressure or trigger
position.

309162B

Important Safety Instructions

Read all warnings and instructions in this manual.
Save these instructions.

Table of Contents

Symbols

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Warnings

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installation

4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Parts

5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Technical Data

5

. . . . . . . . . . . . . . . . . . . . . . . . . . . 

Warranty

6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Summary of Contents for Power Caulk 309162B







Reviews: