Graco Orion 234084, Instructions-Parts List Manual

Page: 11 / 38

Operation
11 309512
Flush the Equipment
Flush before changing colors, at the end of the day,
before storing, and before repairing the equipment.
Flush with a fluid that is compatible with the fluid you are
pumping and with the wetted parts of your system.
Check with your fluid manufacturer or supplier for rec-
ommended flushing fluids and flushing frequency.
1. Relieve the pressure, page 9.
2. Remove the spray tip from the gun. See the gun
manual.
3. Change the fluid source to solvent.
4. Hold a metal part of the gun firmly to the side of a
grounded metal pail.
5. Start the pump. Always use the lowest possible fluid
pressure when flushing.
6. Trigger the gun. Flush until clean solvent flows from
the gun.
7. Relieve the pressure, page 9.
WARNING
Before flushing, be sure the entire system and all
grounding pails are properly grounded. See page 6.
FLUSH