Graco Mini Fire-Ball 225 246910 Instructions-Parts List Manual Download

Page: 1 / 20

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441

309967A

Instructions - Parts List

Mini Fire-Ball

225,

50:1 Grease Pump
Packages

Portable units for dispensing heavy grease.

See page 2 for model numbers.

5000 psi (34 MPa, 345 bar) Maximum Working Pressure
100 psi (0.7 MPa, 7 bar) Maximum Air Working Pressure

Contents

Models . . . . . . . . . . . . . . . . . . . . . . .2

Warnings . . . . . . . . . . . . . . . . . . . . .3

Operation/Service . . . . . . . . . . . . . .4

Installation . . . . . . . . . . . . . . . . . . .5

Operation . . . . . . . . . . . . . . . . . . .11

Parts . . . . . . . . . . . . . . . . . . . . . . .12

Sound Data . . . . . . . . . . . . . . . . . .18

Graco Standard Warranty . . . . . .20

Graco Information . . . . . . . . . . . .20

Important Safety Instructions

Read all warnings and instructions in this manual.
Save these instructions.

253388

Model 253388 shown

Summary of Contents for Mini Fire-Ball 225 246910





















Search results

Summary of Contents for Mini Fire-Ball 225 246910

Reviews:

Related manuals for Mini Fire-Ball 225 246910

Brands by name

Popular brands

Graco Mini Fire-Ball 225 246910, Instructions-Parts List Manual

Search results

Summary of Contents for Mini Fire-Ball 225 246910

Reviews:

Related manuals for Mini Fire-Ball 225 246910

Brands by name

Popular brands