Troubleshooting
3A2152B
37
IAM/AM Status Indicators
Drive Status LED Indicators
Comm Status LED Indicator
Bus Status LED Indicator
Drive Status LED
Indicator
Status
Potential Cause
Possible Resolution
Off
Normal, no faults N/A
N/A
Steady Red
Drive faulted
Seven-segment Fault Status dis-
play shows an error code
Fault exists, refer to Seven-segment
LED Indicator Error Codes begin-
ning on page 134.
Comm Status LED
Indicator
Status
Potential Cause
Possible Resolution
Steady Green
Communication
ready
No faults or failures.
N/A
Flashing Green
Establishing com-
munication
System is still in the process of
establishing SERCOS communica-
tion.
Wait for steady green LED indica-
tor.
Node address setting on the drive
module does not match SERCOS
controller configuration.
Verify proper node switch setting.
Off No
communica-
tion
Loose fiber-optic connection.
Verify proper fiber-optic cable con-
nections.
Broken fiber-optic cable.
Replace fiber-optic cable.
Receive fiber-optic cable con-
nected to SERCOS transmit con-
nector and vice versa.
Check proper SERCOS fiber-optic
cable connections.
Bus Status LED
Indicator
Status
Condition
Steady Green
Bus power is present,
axis enabled. No faults or
failures.
Normal when:
• 24V is applied to Hardware Enable Input (IOD/AF-43).
• MSO instruction is commanded in RSLogix 5000 software.
Flashing Green
Bus power is present,
axis disabled. No faults or
failures.
Normal when:
• 24V is not applied to Hardware Enable Input (IOD/AF-43).
• MSO instruction is not commanded in RSLogix 5000 software.
Off
Bus power not present.
•
Normal when bus power is not applied.
• Fault exists, refer to Seven-segment LED Indicator Error Codes section
beginning on page 134.
Bus power is present in
follower IAM.
•
Follower IAM is not configured as CommonBus Follow in RSLogix
5000 software.
• After dc bus voltage is applied, a 2.5 second delay before the LED indi-
cator begins flashing green is normal operation to provide common bus
leader time to complete pre-charge.
Summary of Contents for LSR Select
