Flush
Flush
Flush the
the
the Pump
Pump
Pump
To reduce the risk of fluid injection injury, static
sparking, or splashing, relieve the pressure and
remove the spray tip before flushing.
NOTE:
NOTE:
NOTE: Use the lowest possible fluid pressure during
flushing.
Before
Before
Before First
First
First Use
Use
Use
The pump was tested in lightweight oil, which is
left in the fluid passages to protect parts. To avoid
contaminating your fluid with oil, flush the equipment
with a compatible solvent before using the equipment.
1.
Engage the trigger lock.
2.
Place the suction tube into solvent supply.
3.
Hold a metal part of the gun/valve firmly to the
side of a grounded metal pail.
4.
Disengage the trigger lock. Trigger the gun until
clean solvent comes from the gun.
5.
Engage the trigger lock.
6.
Place the suction tube in the prepared cleaning
solution.
7.
Hold a metal part of the gun/valve firmly to the
side of a grounded metal pail.
8.
Disengage the trigger lock. Trigger the gun until
cleaning solution comes from the gun.
Before
Before
Before Shutdown
Shutdown
Shutdown
1.
Place the suction tube into the water supply.
2.
Hold a metal part of the gun/valve firmly to the
side of a grounded metal pail.
3.
Disengage the trigger lock. Trigger the gun until
clear water with no cleaning solution comes from
the gun.
4.
Engage the trigger lock.
334187H
13
