Gun Placement
16
3A3426EOperation
Gun Placement
Install Guns
1. Insert guns into gun holder. Tighten clamps.
Position Gun
2. Position gun: up/down, forward/reverse, left/right.
See
, page 18, for examples.
NOTE: When striping above a curb, the mounting clamp
can be rotated for clearance.
Another option can be to swing the gun out at an angle
and rotate the tip guard. This results in better visibility
for the user.
Select Guns (Standard Series)
3. Connect gun cables to left or right gun selector
plates.
a. One gun: Disconnect one gun selector plate
from trigger.
b. Both guns simultaneously: Adjust both gun
selector plates to the same position.
c. Solid-skip and skip-solid: Adjust solid-line gun
to position 1 and skip-line to position 2.
ti27777a
ti27778a
ti28129a
ti28130a
1
2
ti27780a
ti27781a
ti27782a
ti27782a
Summary of Contents for High Production Series
Page 25: ...Cleanup 3A3426EOperation 25 Standard Series ...
Page 26: ...LineLazer V LiveLook Display 26 3A3426EOperation LineLazer V LiveLook Display Standard Series ...
Page 56: ...Wiring Diagram 200HS Standard Series 56 3A3426EOperation Wiring Diagram 200HS Standard Series ...
Page 58: ...Wiring Diagram 200DC Standard Series 58 3A3426EOperation Wiring Diagram 200DC Standard Series ...