Grounding
The equipment must be grounded to reduce the
risk of static sparking. Static sparking can cause
fumes to ignite or explode. Grounding provides an
escape wire for the electric current.
•
Pump:
use a ground wire and clamp. Loosen the
grounding screw (X). Insert one end of a 12 ga
(1.5 mm
2
) minimum ground wire (W) under the
clamp and tighten the screw securely. Connect the
other end of the wire to a true earth ground. For a
ground wire and clamp, order Part No. 222011.
•
Air and fluid hoses:
Use only electrically conductive
hoses.
•
Air compressor:
Follow manufacturer’s
recommendations.
•
Fluid supply drum:
Follow your local code.
•
All fluid pails used when flushing:
Follow your
local code. Use only conductive metal pails
placed on a grounded surface. Do not place the
pail on a nonconductive surface, such as paper
or cardboard, which interrupts the grounding
continuity.
Figure 1 Ground the Pump.
12
333015E
Summary of Contents for Endura-Flo 4D150
Page 9: ...Installation Notes 333015E 9...
Page 30: ...Parts Parts 30 333015E...
