Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Copyright 2007, Graco Inc. is registered to I.S. EN ISO 9001
Before you start
Be sure that you have the following items available:
•
9 in. crescent or open end wrench - 7/8 in.
•
9 in. crescent or open end wrench - 1
1
/
8
in.
•
Waste container
•
Thread tape
These instructions are provided as a quick maintenance guide. They are not meant to replace the
Instruction Manual. See Instruction Manual for Warnings and information on the safe and proper
operation of this equipment. It is important that you read and understand all instructions and
hazards before operating this equipment.
P
RESSURIZED
E
QUIPMENT
H
AZARD
This equipment stays pressurized until pressure is
manually relieved. To reduce the risk of serious injury from
pressurized fluid, accidental spray from dispense valve or
splashing fluid, follow steps 2-3 on page 2.
312354A
Quick Reference Guide
Replacing the EM5
™
Meter
