Graco E-Flo SP, Installation And Parts Manual, Page: 32 / 46

Kits and Accessories
32 3A6586D
2. Ensure the wall mount is level using the wall bracket
as a template. Drill four 7/16 in (11 mm) diameter
holes for the mounting bolts. See
Figure 27
for the
mounting hole fastener locations.
3. Bolt the bracket securely to the wall.
4. Use the screws and washers supplied with the wall
mount and refer to the
Electric Driver Mounting
Hole Pattern
on page
35
to mount the driver to the
bracket once it is secured to the wall.
Floor Mount Adapter, 223952
Refer to the
Floor Stand Mounting Hole Diagram
on
page
35
and the Floor Stand Accessory manual for
proper installation of this floor mount adapter. See
Related Manuals
on page
2
.
CAN Cables
The following CAN cables and splitter are available for
use with E-Flow SP electric pumps.
Light Tower Kit, 255468
For D200s, D200, and D60 single supply systems.
See the Light Tower Kit manual for more information.
I/O Cable, 122029
See the E-Flo SP Software Instructions manual for
setup and pin out information.
F
IG
. 27: Wall Mount Hole Locations
F
IG
. 28: Floor Mount Stand
Ref Part Description Qty
801 186562 PLATE, mounting inductor
1
802 186560 TUBE, adapter
1
803 186561 COUPLING, pipe
1
804 166538 PLATE, base
1
806 185542 COUPLING, half
1
Mounting Hole
Locations
806
804
803
802
801
Part Description Length
125306 CABLE, CAN, female/female
0.3 m
123422 CABLE, CAN, female/female
0.5 m
121000 CABLE, CAN, female/female
0.5 m
121227 CABLE, CAN, female/female
0.6 m
121001 CABLE, CAN, female/female
1.0 m
121002 CABLE, CAN, female/female
1.5 m
121003 CABLE, CAN, female/female
3.0 m
120952 CABLE, CAN, female/female
4.0 m
121201 CABLE, CAN, female/female
6.0 m
121004 CABLE, CAN, female/female
8.0 m
121228 CABLE, CAN, female/female
15.0 m
123341 CABLE, CAN, female/female
40.0 m
121807 CONNECTOR, splitter, male/male
Part Description Length
122029 CABLE, GCA, M12-8p
15.0 m