![background image](http://html1.mh-extra.com/html/graco/e-flo-sp/e-flo-sp_installation-and-parts-manual_2253500003.webp)
Models
3A6586D
3
Models
Check your pump package’s identification (ID) label
located on the side of the electric driver for the 8-digit
part number of your pump package. Use the following
matrix to identify the construction of your pump package
based on the eight digits.
For example: model
EC100CS3
is an electric (
E
)
Check-Mate (
C
) 100 cc (
100
) pump with a carbon steel
(
C
) Severe Duty
®
(
S
) lower, an Advanced Display Mod-
ule (ADM), and 240 VAC power (
3
).
NOTE:
Each Check-Mate pump size is available in CS,
CM, SS, and SM pump materials. Dura-Flo pump mate-
rial combinations depend on the pump size. For
Dura-Flow pumps, MaxLife
®
is only available with the
430 cc stainless steel pump lower. Refer to the matrix
below.
To order replacement parts, see the
Parts
section start-
ing on page
NOTE:
A single electric pump must include an ADM. Up
to six pumps can be connected in a system and con-
trolled by a single ADM. See
Connecting Multiple
Pumps
on page
Approvals
Pump Style
Pump Type
Pump Size
Pump Material
Interface / Power
1st Digit
2nd Digit
3rd, 4th & 5th Digit
6th Digit
7th Digit
8th Digit
E
Electric Pump
C
Check-Mate
100
100 cc Check-Mate
C
Carbon Steel
S
Severe Duty
1
None 240 VAC
200
200 cc Check-Mate
S
Stainless Steel
M
MaxLife
2
None 480 VAC
250
250 cc Check-Mate
3
ADM 240 VAC
500
200 cc Check-Mate
4
ADM 480 VAC
E
Electric Pump
D
Dura-Flo
115
115 cc Dura-Flo
C
Carbon Steel
S
Severe Duty
1
None 240 VAC
2
None 480 VAC
145
145 cc Dura-Flo
C
Carbon Steel
S
Severe Duty
3
ADM 240 VAC
180
180 cc Dura-Flo
S
Stainless Steel
4
ADM 480 VAC
220
220 cc Dura-Flo
290
290 cc Dura-Flo
430
430 cc Dura-Flo
430
430 cc Dura-Flo
S
Stainless Steel
M
MaxLife