Setup
333587B
33
5.
To enable a time frame range of data to download
upon insertion of a USB drive, use the
key in
the Data Range Prompt Enable box.
6.
Press the
soft key to save your changes and
exit editing mode.
Advanced Setup Screen 4
Use the ADM Directional Keypad (CH) to navigate to
Advanced Screen 3.
This screen can be used to view the version of software
used in the system. Additionally, this screen is used to
update the system software using a USB drive with the
latest software and a Graco black token. The latest
software is provided on Help.graco.com.
Refer to the ADM Token In-System Programming
manual for a detailed description of this screen. See
Related Manuals
on page
Connect Light Tower Assembly
1.
Order the 255468 Light Tower Accessory as a
diagnostic indicator for the E-Flo iQ System.
2.
Connect the cable from the light tower to the digital
I/O port (CS) on the ADM (AF).
NOTE:
See
Troubleshooting
on page
for error
definitions.
Signal
Description
Off
System is not active
Green Only On
System is active and no errors are
present
Blinking Green
Heat is warming up
Yellow On
An advisory exists
Blinking Yellow
A deviation exists
Red solid
The system is shut down due to
an alarm occuring
