Operation
333587D
43
The indicators normally show as green. When a low
level sensor on the ram is activated because material in
the drum is low, the top indicator for the pump turns red
and an error symbol appears next to the pump.
When an empty level sensor is activated on the ram, the
bottom indicator for the pump turns red and the error
symbol changes to the one selected for the empty level
sensor.
In the example above, the low level sensor is set to
Deviation and the empty level sensor is set to Alarm to
stop operation of the pump.
Run Screen Editing Mode
Press the
soft key to enter editing mode.
Press the
soft key to access the Style Definitions
setup screens. See
Style Definitions
on page
for
information about this function.
You can change the style identification number without
going to the Style Definitions setup screens. Enter the
new number using the numeric keypad and confirm it
by pressing the
key.
Press the
soft key to access the Job Log. See
Job
Log
on page
for information.
Press the
soft key to exit editing mode.