Cleanup
22
3A4803A
15. Remove spray tip, spray tip guard, and
pump filter. Clean with appropriate
cleaning fluid (water or mineral spirits). A
soft brush can be used to loosen and
remove dried material if needed.
16. Use a soft cloth to clean the cup support
and cup cover.
Cleaning Sprayer Exterior
Wipe paint off the outside of the sprayer using
a soft cloth moistened with water or flushing
fluid. Do NOT submerge the sprayer.
Cleaning VacuValve
The VacuValve is an important part of your
sprayer and it should be cleaned after every
use.
1.
Remove VacuValve cap from cup cover
and clean it.
2.
Clean VacuValve reservoir in lid.
3.
Clean VacuValve air hole. If VacuValve
air hole becomes clogged, use a paper
clip to clean the hole.
ti29769a
ti23372a
This sprayer is
equipped with a
static wick that
reduces the
build-up of static
charge to
reduce the risk
of fire and
explosion.
KEEP THIS
SURFACE
CLEAN OF
OVERSPRAY.
ti30635a
ti23406a
Summary of Contents for 3A4803A
Page 31: ...Notes 3A4803A 31 Notes...
Page 43: ...Notes 3A4803A 43 Notes...
