Repair
3A7398A
19
7. Use one of the set screws and thread it into the
middle hole to back out the bushing as shown
below.
8. Lift off the pulley. Remove the four mounting bolts to
the bearing assembly and lift out the assembly.
Bearing Replacement (Model
25P471)
Tools required:
•
Two 3/4” socket or wrench
•
9/16” socket or wrench
1. Turn off auxiliary circuit and wait until the
GrindLazer cools off if it has been running.
2. To remove the drive bearing assembly, first follow
, page 15, to remove the
cutter heads.
NOTE:
It may be needed to completely remove the
motor and Universal Quick Attach Mount Plate to
have enough working room. This gives you access
to the bearing assembly.
3. If it has not been done, remove the cutter heads.
Perform
, page 15, before
proceeding.
4. Start by removing the hydraulic motor from the
motor adapter using the 9/16” socket or wrench.
