background image

Read Operation manual 3A5725 for complete instructions and warnings. 

This guide is not a substitute for reading and understanding all operation manuals and warning labels supplied 
with the equipment. It is important that you read and understand all warnings and instructions before operating 
this equipment. 

Follow the pressure relief procedure 

and wear protective equipment including but not limited to protective eye wear.

RUPTURE HAZARD:

 Over-pressurizing the hopper can result in rupture. To avoid injury, only pressurize hopper 

by connecting air supply tube to barbs on hopper and gun.

FAILURE TO FOLLOW ALL WARNINGS CAN RESULT IN SERIOUS INJURY, AMPUTATION OR DEATH.

COMPONENT IDENTIFICATION - 25D496

A. Material Flow Regulator

: Pressurizes 

the material hopper and adjusts material 
flow. Turn counterclockwise to decrease 
flow; turn clockwise to increase flow. Push 
down to lock; pull up to unlock.

B.

 

Needle Travel Adjustment Knob: 

Adjusts the positions of the gun needle in 
relation to the spray tip. Turn clockwise to 
limit needle travel and reduce material 
flow; turn counterclockwise to increase 
needle travel and increase flow.

C.

 

Air Flow Valve: 

Adjusts the amount of 

atomizing air that is sent to the spray tip to 
control the spray pattern. Turn clockwise to 
decrease air flow; turn counterclockwise to 
increase air flow.

Quick Start Guide

 

for Pressurized Hopper Gun

For spray application of water-based architectural and texture coatings.

Recommended gun settings for different patterns can be found on page 19 of the Operation manual.

WARNING

Reviews: