Torque
Torque
Torque Instructions
Instructions
Instructions
If fluid cover or manifold bolts have been loosened,
it is important to torque them using the following
procedure to improve sealing.
NOTICE
NOTICE
NOTICE
Do
Do
Do not
not
not over
over
over---torque.
torque.
torque. Tightening the bolts too tight
will damage the pump.
NOTE:
NOTE:
NOTE: Always completely torque fluid covers before
torquing fluid manifolds.
1.
Remove the protective bolt covers (37) with
a screwdriver. Carefully work the screwdriver
under the lip of each cap and gently pry it off.
2.
Start all fluid cover screws a few turns. Then, turn
down each screw just until head contacts cover.
3.
Turn each screw by 1/2 turn or less working in a
crisscross pattern to specified torque.
4.
Repeat for fluid manifolds.
Assembly
Torque
Re-Torque
Fluid Covers
20 in-lb (2.3
N∙m)
15 in-lb (1.7
N∙m)
Fluid
Manifolds
15 in-lb (1.7
N∙m)
10 in-lb (1.1
N∙m)
Fluid
Fluid
Fluid Cover
Cover
Cover Screws
Screws
Screws
Fluid
Fluid
Fluid Manifold
Manifold
Manifold Screws
Screws
Screws
22
334792G
