background image

- For Portable Spray Applications Architectural Paints and Coatings -

- Not for use in explosive atmospheres -

Models 24K632 and 24K633

Pressure Relief Procedure

Important Safety Instructions

Read all warnings and instructions in this 
manual. Save these instructions.

To help prevent injection injuries, follow this 
procedure when you stop spraying and before 
you service or clean the sprayer, remove 
parts, or repair leaks.

Kit Instructions

Leg Replacement Kit for 
Airless Sprayers

3A1964A

EN

1.

Turn Power switch OFF. Unplug sprayer.

2.

Turn Spray/Prime valve to PRIME to relieve pres-
sure. Turn pressure control knob left (counterclock-
wise) to minimize pressure.

3.

Trigger gun.

4.

Put trigger safety in safety ON position.

NOTE:

 Leave Spray/Prime valve in the PRIME 

position until you are ready to spray again.

If you suspect that the spray tip or hose is completely 
clogged or that pressure has not been fully relieved 
after following the steps above,

 VERY SLOWLY loosen 

the tip guard retaining nut or hose end coupling to 
relieve pressure gradually. Then loosen it completely. 
Clear the tip or hose obstruction.

ti17726a

Model 24K632

Model 24K633

ti11868a

Reviews: