Graco 24F561, Repair Manual

Page: 21 / 40

Fuse Replacement
3A1181B 21
Fuse Replacement
If the fuse is blown, check for:
• Pinched or shorted wires
• A defective motor (see Spin Test, page 16)
• A locked or frozen pump
Correct defective condition before replacing fuse.
Removal
1. Relieve pressure, page 7 . Disconnect power cord
from outlet.
2. Hi-Boy Models Only - Disconnect high-pressure
hose at pump outlet (see page 13) .
3. Remove two screws (4) and shroud (12) (see illus-
tration, page 17) .
4. Remove fuse from control board.
Installation
1. Install Fuse 119277 on control board.
2. Install shroud (12) and two screws (4) (see illustra-
tion, page 17) .
3. Hi-Boy Models Only - Connect high-pressure hose
at pump outlet (see page 14) .
Replaceable Fuse
ti9134b