background image

Tether attached to

a fixed position

Identification

window

Eng. Co 7
F F Smith

1.

To 

Reset

, press both

side buttons simultaneously
when accountability key
is off unit.

2.

To turn 

OFF

, replace 

accountability key and press 
both side buttons 
simultaneously.

Tether attached to

a fixed position

Identification

window

Eng. Co 7
F F Smith

Emergency
Alarm
Button

.
.

T

A

C 3 SERIAL NUMBER

C

H

E

C

K

 U

N

IT

'S

 F

U

N

C

T

IO

N

 B

E

F

O

R

E

 U

S

E

.

R

E

P

L

A

C

E

 B

A

T

T

E

R

Y

 W

H

E

N

 L

O

W

B

A

T

T

E

R

Y

 W

A

R

N

IN

G

 S

O

U

N

D

S

.

C

O

N

S

U

LT

 I

N

S

T

R

U

C

T

IO

N

 M

A

N

U

A

L

B

E

F

O

R

E

 R

E

P

L

A

C

IN

G

 B

A

T

T

E

R

Y

.

O

P

E

R

A

T

IN

G

 T

E

M

P

E

R

A

T

U

R

E

 C

O

D

E

 T

1

.

W

A

R

N

IN

G

S

U

B

S

T

IT

U

T

IO

N

 O

F

 C

O

M

P

O

N

E

N

T

S

M

A

Y

 I

M

P

A

IR

 I

N

T

R

IN

S

IC

 S

A

F

E

T

Y

TAC 3

USER’S INFORMATION

Only To Be Removed By End User

TAC 3 with
Accountability
Key in Place

Grace Industries, Inc.

305 Bend Hill Road, Fredonia, PA 16124

724-962-9231 • FAX 724-962-3611

Front  View Without
Accountability Key

Warranty Information

Grace Industries, Inc. warrants the unit to be

free from defects in workmanship and materials
for a period of one year from the date of purchase.
This warranty is valid only when the returned unit
is accompanied by a sales slip or other proof of
purchase that states the date and location of pur-
chase. Grace Industries, Inc. will not repair or re-
place any merchandise under warranty which has
been damaged because of accident, misuse or
abuse of the unit while in possession or control of
the consumer. This warranty is void if any attempt
to repair or replace parts was made or attempted
by other than qualified Grace Industries, Inc. per-
sonnel. This warranty is void if any of the sealed
compartments are opened or tampered with. Send
all returned merchandise, prepaid and accompa-
nied by proof of purchase to: Grace Industries,
Inc., Repair Division, 305 Bend Hill Road,
Fredonia, PA 16124. Grace Industries, Inc. shall
not be liable for any direct, incidental or other con-
sequential loss or damage arising out of the fail-
ure of the device to operate.

The sole and exclusive remedy under all guar-

antees or warranties, expressed or implied, is
strictly limited to repair or replacement as herein
provided. ALL IMPLIED WARRANTIES, INCLUD-
ING BUT NOT LIMITED TO, WARRANTIES OF
FITNESS AND MERCHANTABILITY, ARE
HEREBY LIMITED IN DURATION TO A PERIOD
ENDING ONE (1) YEAR FROM THE DATE OF
PURCHASE. The warranty and liability set forth in
the prior paragraphs are in lieu of all other war-
ranties, expressed or implied, in law or in fact, in-
cluding implied warranties of merchantability  and
fitness for a particular purpose. Some states do
not allow limitations on how long an implied war-
ranty lasts, so the above limitations may not apply
to you.

This warranty gives you specific legal rights and

you may also have other rights which may vary
from state to state.

The information contained in this booklet is be-

lieved to be accurate and reliable. Grace
Industries, Inc. provides this information as a guide
only.

TAC 3

 

system technical assistance is avaiable

by contacting Grace Industries, Inc.
at 724-962-9231.

For training purposes a copy of this information is available
by contacting Grace Industries, Inc.

TAC 3 issues may be reported at any time to Grace
Industries, Inc. at 724-962-9231.

© Grace Industries, Inc.

Printed in U.S.A.

P/N 

TAC3

 

Auto-On

 

0

609 UI

Side View with
Accountability
Key in Place

Gasket
Seal

Sound Port

Accountability
Storage Key

D-Ring and
Grip Clip

TAC 3 FEATURES

Inside Back Cover

Inside Back View
Battery Chamber

Serial
Number

General Instruction Label

TAC 3  LABELING

French Intrinsic Safety Label

Accountability Storage Key

Identification Window

Solutions for Life Safety 

Solutions for Life Safety 

Auto-On

Activation

Emergency
Alarm
Button

Case Glows
When Key
Pops Off

Remove unit from storage position.
Tether tighens, Keypops off and unit
automatically gose into 

Sensing 

mode.

Product Life:

Approx. 3 to 7 years or longer depending on
fitness for use. Fitness for use is best
determined by the end user through a proper
inspection and maintenance program. Product
should be retired from service when damaged
or determined unfit for use.

TAC 3 Visual / Audio Mode Display

OFF

- Storage key in place with no LED display.

ON

- Storage key removed with an alternating

yellow wig-wag LED display - a series of
escalating, loud, attention getting audio tones
when accountability key is removed.

Alarm

- Manual Activation

:

 Yellow wig-wag LED display

is replaced by the rapid pulsing of two red  LEDs.

Accompanied by a rapidly modulated loud
(98+dBA ) audio alarm.

The alarm signal is between 1,000 and 2,000
Hertz and cycles at 5.25 seconds on and .75
seconds off as an aid for determining direction
when personnel need assistance.

EVACUATE signal received

- Activated by a signal from the T3 LCD Base or

In-Command, TAC 3 must be in the 

ON

 mode

Yellow wig-wag LED display of the sensing
mode is replaced by the rapid flashing of
both amber LEDs.

- Loud chirping audio alarm tone simultaneous

with the rapid flashing of both amber  LEDs.

- Manual acknowledgement of EVACUATE

signal by momentarily pressing both side
buttons simultaneously, the operational signal
will be heard.

TAC 3 Mode Selection

Auto-On

- When removed from storage position,

Accountability Key pops off and unit goes
into the ON mode.

ON

- Yellow wig-wag LED display - unit is ON.

Alarm

- Unit may be put into Alarm from the ON mode

at any time by pressing the button on the front
of the unit.

Reset

- When in Alarm, the unit may be reset to the ON

mode by simultaneously pressing both side
buttons.

OFF

- Unit may be turned Off by replacing the storage

key and simultaneously pressing both side
buttons.

 

FCC ID: J5XTP3TXRX  

GRACE INDUSTRIES, INC., FREDONIA, PA 16124

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(

1

)

 THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,

AND 

(

2

)

 THIS DEVICE MUST ACCEPT ANY INTERFERENCE 

RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE

UNDESIRED OPERATION.

MADE IN USA

 IC: 5916A-TP3TXRX 

REPLACE BATTERY WITH 
DURACELL MN1604, 9 VOLT 
ALKALINE BATTERY.
WARNING: TO REDUCE THE RISK 
OF IGNITION OF A FLAMMABLE 
ATMOSPHERE, BATTERIES MUST 
ONLY BE CHANGED IN AN AREA
KNOWN TO BE NONFLAMMABLE

EXI  INTRINSICALLY SAFE PER 
ANSI/UL 913. FOR USE IN CLASS 
I, DIV. 1, GROUPS A, B, C AND D 
HAZARDOUS LOCATIONS

GRACE IND. INC.

305 BEND HILL RD

FREDONIA, PA

CERTIFIED TO CAN/CSA STD. 

C22.2 NO. 157-92

Intrinsic Safety Label

FCC Label

Reviews: