
m908 User Manual, Rev. G
Note: Since the solo/mute functionality is live during setup it is possible that the currently
selected switch will not be illuminated. Be sure to check the switch name in the text band at the
top of the left side of the screen.
6.3.10
Room Correction setup
The m908 room correction EQ is accessed through the Control Room Setup screen.
Push the SETUP switch and then any of the CR1, CR2, or CR3 speaker select switches to
enter the Setup Speaker screen. Click on
channel setup
to enter the Channel Setup screen.
Navigate to
room eq
. The following parameters control the Room Correction EQ
The Room Correction EQ screen displays up to 6 parametric equalizer bands depending on the
speaker "type". Sub channels have 6 bands of EQ while all other speakers have 3 bands.. Each band
contains the following parameters:
•
Hz
The center frequency or shelf frequency of the selected filter. Range is 10Hz-20kHz
with 246 steps in approximately 1/24octave spacing.
•
dB
The boost or cut level for peak, high shelf, and low shelf filter shapes. Range is -12db
to +12dB
•
shape
Selects the filter shape. Options are <peak, high shelf, low shelf, high pass, low
pass>
•
Q
Sets the filter Q for peak filter shape. Range is <0.02 - 50>
•
►Exit band
To navigate the EQ screen:
◦
Turn the VOLUME encoder to select between the available EQ bands.
◦
Click the VOLUME encoder to edit an EQ band.
Page 90 of 135
Illustration 83: Speaker EQ Parameter Screen