17
14 Specifications
GAIN RANGE (Input to DI Output)
CH1 MIC
Low Gian: 17-62dB 21-62dB / High gain: 22-63dB
CH1 Inst
Low Gain: 3-48dB / High Gain: 17-62dB
CH2 Inst
-1-37dB
Boost
0-9dB
THD+N 1kHz, 22Hz-22kHz BW (MIC Input to DI Output line level out)
@ 20dB Gain +10dBu out
<0.015%
@ 40dB Gain +10dBu out
<0.015%
@ 60dB Gain +10dBu out
<0.020%
INTERMODULATION DISTORTION - SMPTE/DIN 4:1 7kHz/50Hz (MIC Input to DI Output)
@ 40dB Gain +10dBu out
<0.05%
NOISE - REFERRED TO INPUT CH1 MIC @60dB Gain 22Hz-22kHz BW
50Ω source
<-128dB
CMRR @60dB Gain
100Hz
>55dB
1kHz
>75dB
10kHz
>85dB
FREQUENCY RESPONSE (Input to DI Output)
Mic input @ 40dB Gain -3dB
20Hz – 65kHz
Inst input @ 20dB Gain -3dB
20Hz – 65kHz
I/O IMPEDANCE
CH1 MIC Input
8.1kΩ
CH1 Inst Input
HI: 10MegΩ / MED: 1MegΩ / LOW: 10kΩ
CH2 Inst Input
HI: 20MegΩ / MED: 1MegΩ / LOW: 332kΩ
Insert Input
10kΩ
DI Outputs
150Ω
Amp, Tuner, Headphone and Insert Outputs
150Ω
SIGNAL / PEAK LED METER
Green threshold
-10dBu
Red threshold
+10dBu
MAXIMUM INPUT LEVEL
CH1 MIC (low gain mode)
+4dBu
CH1 MIC (high gain mode)
1dBu
CH1 Inst
Low Gain: +18dBu / High Gain: 4dBu
CH2 Inst
+20.5dBu
MAXIMUM OUTPUT LEVEL - 100k Ohm load, 0.1% THD
DI Outputs
Line: +20dBu / Mic: -6dBu
Amp, Tuner, Headphone and Insert Outputs
+22dBu
High Pass Filter / Notch Filter
High Pass Filter
20Hz – 1kHz @ -12dB/octave
Notch Filter
20Hz – 1kHz, >-35dB, Q>4.0
EQ
Gain
+/- 12dB
Low Frequency
Low Range: 125Hz Shelving / High Range: 250Hz Shelving
Mid Frequency
Low Range: 70Hz – 880Hz / High Range: 670Hz – 8kHz
Mid Frequency Q
0.5 – 5
High Frequency
Low Range: 1kHz Shelving / High Range: 2kHz Shelving
OUTPUT NOISE 22Hz-22kHz BW @ MIN Gain
CH1 MIC Input (50 ohms) to DI Output
<-90dBu
CH1 Inst Input to DI Output
<-89dBu
CH2 Inst Input to DI Output
<-98dBu
POWER CONSUMPTION
100-240VAC 50/60Hz
10 Watts Max
WEIGHT and DIMENSIONS
3.2lbs
H3.0” x W9.5” x D5.5”
Mic stand flange mount screws (not included)
6-32 X 3/8 pan head phillips stainless steel
