9
The battery begins charging as soon as it is connected to the
charger, and stops charging as soon as it is full.
Operating the Grabo Plus
1.
Slide the power switch to the left, to the ON position, to power
on the grabo plus. The power indicator below the power
switch lights up to show you the amount of charge you have
available. The power indicator will flash if the battery is low
and needs to be charged before the grabo plus can be used.
Caution:
Using the grabo while the battery is low
may result in injury and damage to the materials
being lifted.
2.
Position the grabo plus flush against the surface of the item
you want to lift.
3.
Press the green button to turn on the motor and create a seal
to the surface of the item you want to lift. The seal is created
within a second.
4.
When the sensor detects that pressure is being lost, the
start/stop pump will automatically turn on to create the
required pressure. The pump will automatically turn off when
the required pressure is reached.