grabner HAPPY CAT LIGHT, Owner'S Manual, Page: 29 / 44

29
►
Hook the foresail tack to the endless jib
furler.
► Hoist the foresail and fasten the halyard
to the port cleat at the lower mast sec-
tion.
IMpORTANT NOTICE:
Ensure the foresail to
be set very taut. The
luff must be under ten-
sion, and not the fores-
tay. As a result, the en-
tire system (shrouds,
tension ropes, luff) are
correctly tensioned.
► Stow excessive line of the halyards in
the halyard-pouch on the trampoline.
► Feed the foresheet though the clews
sheet lead, in a manner that that provi-
des two equal length ends.
► Secure the sheets at the clew by means
of a knot.
► Feed both ends of the sheet through the
foresheet cam cleats to port and star-
board on the trampoline frame, and se-
cure each by figure eight knot.
► The elastic rope in
the forestay should
be, with hoist foresail,
something under ten-
sion. If the forestay
is too loose, the up-
per metal ring must
be placed somewhat
more higher.
► Attach the mainsail carabiner to the the
mainsail head(upper corner of the sail)
► Feed the mainsail bolt rope into the mast
groove.
► Hoist the mainsail and secure the haly-
ard to the starboard cleat at the lower
mast section.
ATTENTION: When placing the sail, pull
it to the mast so that it goes directly into
the groove.