8
The Auto Channel Scan must be run before any channels can be viewed on the television.
1. Press the
Source
button to switch to TV mode.
2. Press the
Setup
button to access the setup menu.
3. Press the
Arrow
(
) buttons to highlight the CHANNEL icon. Press the
Enter
button.
4. Press the
Arrow
(
) buttons to highlight SIGNAL TYPE. Press the
Arrow
(
) buttons to select AIR.
5. Press the
Arrow
(
) buttons to highlight AUTO CHANNEL SEARCH. Press the
Enter
button to begin
scanning for available channels.
Auto Scanning for Channels
Setup
Connecting a Set-Top box
Requires a TV antenna (not included).
1. Connect a VHF, UHF, or HDTV antenna to the
RF
Input
on the television.
2. Press the
Source
button to switch to TV mode.
3. Press the
Setup
button to access the setup
menu.
4. Press the
Arrow
(
) buttons to highlight the
CHANNEL icon. Press the
Enter
button.
5. Press the
Arrow
(
) buttons to highlight
SIGNAL TYPE. Press the
Arrow
(
) buttons to
select AIR.
6. Press the
Arrow
(
) buttons to highlight
AUTO CHANNEL SEARCH. Press the
Enter
button
to begin scanning for available channels.
Connecting a TV Antenna
Requires a cable connection.
1. Connect a cable to the
RF Input
on the
television.
2. Press the
Source
button to switch to TV mode.
3. Press the
Setup
button to access the setup
menu.
4. Press the
Arrow
(
) buttons to highlight the
CHANNEL icon. Press the
Enter
button.
5. Press the
Arrow
(
) buttons to highlight
SIGNAL TYPE. Press the
Arrow
(
) buttons to
select CABLE.
6. Press the
Arrow
(
) buttons to highlight
AUTO CHANNEL SEARCH. Press the
Enter
button
to begin scanning for available channels.
Connecting Basic Cable
Requires a Set-Top Box (not included).
If your Set-Top Box has an HDMI Output:
•
Connect the HDMI output on the Set-Top Box to the
HDMI Input
on the television using an HDMI cable (not
included).
If your Set-Top Box has a Composite Video Output:
•
Connect the video output on the Set-Top Box to the
Composite Video Input
on the television using an
A/V RCA cable (not included). Connect the audio output on the Set-Top Box to the
RCA Audio Input
on the
television.
If your Set-Top Box has a Component Video Output:
•
Connect the component video output on the Set-Top Box to the
Component Video Input
on the television
using a component RCA cable (not included). Connect the audio output on the Set-Top Box to the
RCA Audio
Input
on the television.
After connecting your Set-Top Box:
•
Press the
Source
button to switch to YPBPR, AV, or HDMI to match the connection used.