CUSTOMER HELPLINE | 1-314-621-2881
GPX | MW350B
Features
What’s Included
• CD Player: CD, CD-R/RW
• MP3 Disc Playback
• 60-Second Anti-Skip Protection
• 100-Second Anti-Skip Protection on MP3
• ID3 Tag Compatible Simple LCD Display
• Low Battery Indicator
• Programmable Tracks
• Repeat Play
• Song Skip/Search
• Preset EQ
• Electronic Volume
• Line-Out Jack, 3.5mm type
• DC power: requires 2 AA batteries (not
included), AC/DC adapter (not included)
• Includes: stereo earbuds
• PC800
• One set of Stereo Earbuds
• Documentation
WARNINGS AND PRECAUTIONS
IMPORTANT SAFETY INSTRUCTIONS
INTRODUCTION
USER’S GUIDE
V:1400-0529-09
PC800
Personal CD/MP3 Player with Skip Protection
10 + Album
Press to skip forward
10 tracks on the
loaded CD.
Skip/Search
Press to skip forwards
or backwards through
tracks on a loaded
CD.
Press and hold to
search forwards or
backwards through an
individual track.
EQ/PROG
Press to adjust the EQ
mode. (
Normal, DBB,
Pop, Classic, Jazz,
Rock
)
With the loaded CD
stopped, press to
program the CD to
play selected tracks in
a specified order.
Volume
Press to adjust the
volume of the CD
player.
Stop/Off
Press to stop a CD
during play.
With the loaded CD
stopped, press and
hold to turn the unit
off.
Repeat
Press to cycle through
play modes.
REPT 1
- repeat the
current track
REPT ALL
- repeat
the entire album
INTRO
- play the first
10 seconds of every
track
RND
- play tracks in a
random order
Play/Pause
Press to play or pause
the loaded CD.
DC Power Input
Use to connect an AC/
DC adapter or a DC
car charger to the CD
player.
Line Output
Use to connect the
CD player to a stereo
system.
Headphone Jack
Use to connect a set
of headphones or
earbuds to the CD
player.
Open
Use to open the CD
door.
• CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
• WARNING:
To prevent fire or shock hazards, do not
expose this unit to rain or moisture.
• CAUTION:
Use of controls or adjustments or perfor-
mance of procedures other than those specified may
result in hazardous radiation exposure.
• WARNING:
Changes or modifications to this unit
not expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
• WARNING:
Do not place the unit on top of any soft,
porous, or sensitive surfaces to avoid damaging the
surface. Use a protective barrier between the unit and
surface to protect the surface.
• CAUTION:
Danger of explosion if battery is in-
correctly replaced. Replace only with the same or
equivalent type.
• PRÉCAUTION:
Danger d’explosion si les piles sont
remplacées de façon incorrect. Remplacer les piles
seulement par le même type de pile ou l’équivalent.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or
rechargeable (ni-cad, ni-mh, etc) batteries.
No mezcle baterías viejas y nuevas.
No mezcle baterías alcalinas, estándar (carbono-
zinc) o recargables (ni-cad, ni-mh, etc.).
Main plug is used as disconnect device and it should
remain readily operable during intended use.
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding
- type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are
provided for your safety. When the provided plug does not fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally,
or has been dropped.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
WARNING
: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
