GW-2000 Wristwatch Tracker
14
Explanation:
You can store 3 telephone numbers at most in advance
。
When
GW2000 tracker receives the instruction and confirms the password correctly,
substitutes the new number for the existing number. After success, it will send
the confirmation messages (SET USER NUMBER (1-3) OK) to the sender.
Note: The factory set or reset the number stored post is empty. This command
mode is not affected by machine switch until the receipt of further changes or
reset operation to the relevant directives.
1.4 Single localization request instruction
Format:
666+ password (4 figures)
eg:
6660000
Explanation
: When GW2000 tracker receives the instruction and confirms the
password correctly, reads the GPS information. No matter whether effective,
the information with the replying base station which is the set of the original
software will be sent to the sender.
Data format:
Lat: Latitude Direction (+/-) Latitude Value (Accuracy for 5 after the
decimal point)
Long: Longitude Direction (+/-) Longitude Value (Accuracy for 5 after the
decimal point)
Speed: Speed KM/H (Accuracy for 2 after the decimal point)
Direction: Direction (Accuracy for 2 after the decimal point)
Date: Date YYYY-MM-DD
Time: Time HH
：
MM
：
SS (GMT)
BS: Base Station information
Fix: Location state (A/V)
ID: IMEI
STATE: Message state
Effective data format:
Lat: +22.50500
