umanamedical.com
Page 13 of 27
1. Open the Data Transfer Interface software
2. Log in using the same T1 app credentials (internet connection is required)
3. Switch on T1 Heart Monitor and plug into the offload dock.
4. With the USB cable provided, connect the offload dock to a PC.
5.
Click on ‘Detect’ and wait until the T1 device is detected.
6. Once the device is detected, the serial number is listed on the screen. Select the
serial number and cli
ck ‘Upload Holter Session’. (Internet connection is required)
7.
Enter the patient code/ID and click ‘Next’
8. The offload process starts and wait until the process is completed successfully.
9. Switch off the T1 Heart Monitor and disconnect the offload dock from the PC.
10. Close the offload uploader
8.7. Monitoring Mode
8.7.1 First time use
1. Login using the credentials
(email and password) provided.
2. Read and Accept Terms and
Conditions.
3. Information screen to download The
User Manual. Tap ‘Next’.
8.7.2 Normal Use
1.Select your device by
serial number and press to
connect.
2. Optional you can give a
name to the connected
monitor and tap ‘Next’.
3.Choose your sensor,
SmarterSkin or
Smar (refer to
sensor packaging)
4. This screen will check the
system. If all is connected the
app will take you to the next
screen.