Govaerts Recycling NV | Kolmenstraat 1324 | B-3570 Alken | [email protected] | www.govaplay.com
1
+/- 121 kg
180
95
48
135
62
76
Material
· Solid posts and planks made of recycled plastic (PE), coloured throughout.
· Stainless steel screws and lock bolts
Mounting
The Picnic table GP17 is delivered fully assembled. Anchorage is possible.
Description
The picnic table consists of 2 A-shaped legs made of 5 x 12 cm beams on which the table
top and the two seats are mounted. The seat consists of two 4 x 12 x 180 cm boards, each
reinforced underneath with a countersunk galvanized profile. The table top consists of five 4
x 12 x 180 cm boards, the two outer being reinforced with a countersunk galvanized flat strip.
The middle board is reinforced with a galvanized T-strip. Furthermore, a galvanized cross
profile is screwed underneath the center and both sides of the table top, connecting the
boards. Between the A-shaped table legs, a 5 x 12 cm beam is mounted. A hole of 50 mm for
a parasol post is provided in the middle of the table.
Anchorage
The picnic table GP 17 is freestanding or to be anchored on a hard surface. The table GP17b
has extended legs which are to be anchored in a loose ground (grass, …) using sand-cement
mixture or concrete.
User manual GP17
"Picknick tablel Maxi"
( version 2015-01)
Latest version can always be found at www.govaplay.com
According to EN1176, this picnic table
is not considered as being a play equipment.
Therefore, a TÜV-certificate is not required.
Only for use with parasol posts
diameter 45 to 48 mm
(By using smaller parasols, there
will be the risk of finger entrapment)
!
NO parasol use
during heavy wind ...
100% recycled material
