3 Product Description
3.1 General description i-ALERT
®
2 Equipment Condition Monitor
Description
The i-ALERT
®
2 Equipment Condition Monitor is a compact, battery-operated monitoring device that con-
tinuously measures the vibration and temperature of the pump power end. The i-ALERT
®
2 sensor uses
blinking red LEDs and wireless notification to alert the pump operator when the pump exceeds vibration
and temperature limits. This allows the pump operator to make changes to the process or the pump be-
fore a catastrophic failure occurs. The Condition Monitor is also equipped with a single green LED to in-
dicate when it is operational and has sufficient battery life. (i-ALERT
®
2 Bluetooth Equipment Condition
Monitor option available. The i-ALERT
®
2 monitor allows customers to identify potential problems before
they become costly failures. It tracks vibration, temperature and run-time hours and wirelessly syncs the
data with a smart phone or tablet the i-ALERT
®
2 mobile app. More information available on
More information available on
http://www.ittproservices.com/aftermarket-products/monitoring/i-alert2/i-
http://www.gouldspumps.com/en-us/tools
or your local ITT Goulds Pumps Sales Rep.
3.2 Nameplate information
Important information for ordering
Every pump has nameplates that provide information about the pump. The nameplates are located on
the casing and the bearing frame.
When you order spare parts, identify this pump information:
•
Model
•
Size
•
Serial number
•
Item numbers of the required parts
Item numbers can be found in the spare parts list.
Refer to the nameplate on the pump casing for most of the information. See Parts List for item numbers.
Nameplate on the pump casing using English units
Figure 7: Nameplate on the pump casing using English units
3 Product Description
XHD Installation, Operation, and Maintenance Manual
19
Summary of Contents for XHD
Page 1: ...Installation Operation and Maintenance Manual XHD ...
Page 2: ......