Software
English, Revision 04, Date: 19.01.2015
31
If you are using a different port than
COM1
with HyperTerminal, then adjust the port as
follows:
1.
Select Properties from the menu file (or click the Icon
). The following window
appears:
2.
Choose the direct connection to the respective port via the submenu
direct
connection
. Confirm with
. Save the altered values if you are asked for it
while exiting HyperTerminal.
5.3
System Monitor
In monitor mode the system can be configured using the corresponding menu. To use
the monitor mode you need to know which protocol is set in your antenna.
5.3.1
How to start the monitor program
The command for switching to monitor mode should be input directly via a PC. For the
startup, a set of configuration files is necessary (small text files and HyperTerminal
configuration files). These files are accessible always in the latest version from our in-
ternet server at
http://www.goetting-agv.com/components/transponderconf
for down-
load. On that page you‘ll find the individual text files.
Start your terminal program. If you are using HyperTerminal (section 5.1) it can now be
started directly by double clicking the respective *.ht file (
Monitor19200.ht
at
19200 Bd and
Monitor38400.ht
at 38400 Bd). If necessary, adapt the COM-port
(see section 5.2).
Following the switching on and a minimum period of 10 (respectively 26) seconds, you
may transfer the required *.txt file from the disc using the terminal program. The follow-
ing four files are on the disc:
1.
Mon3964r.txt
Transfer if the system is adjusted to procedure
3964R
with “
HighByte first
“. The
file contains the characters:
0x02 0x4D 0x4F 0x4E 0x49 0x10 0x03
0x16 in hexa-decimal notation
2.
Mon6439r.txt
Transfer if the system is adjusted to procedure
3964R
with “
LowByte first
“. The
file contains the characters:
0x02 0x4F 0x4D 0x49 0x4E 0x10 0x03
0x16in hexa-decimal notation
