manualshive.com logo in svg

Gotting HG 73840ZB, Device Description, Page: 30 / 65

Share
Download
Gotting HG 73840ZB Device Description Download Page 30

Software / Parameter Settings

HG 73840ZB

English, Revision 06, Date: 12.07.2011

30

In this menu, the minimal symbol contrast Scmin can be set. This value is the threshold 
for detecting a barcode.

4.8

Luminance Histogram

In order to determine the suitability of the guidance track for secure detection, there‘s 
a Luminance histogram available:

Figure 17

Screenshot: Luminance intensity within a Luminance Histogram

The horizontal axis shows the possible luminance values between 0 and 255. Due to 
limited space 4 luminance values are always generalized to one value. The vertical 
axis shows the respective frequencies. The above given example shows a certain ac-
cumulation at maximum luminance and a second accumulation at less luminance. 
This enables perfect guidance track recognition. However, a black-and-white check 
pattern will give the same luminance picture, but at the same time be completely use-
less for track recognition. Therefore two additional diagrams are available.

Luminance-Histogram                             press any key to return

     200:.......................O.......................................O

     190:.......................O.......................................O

     180:.......................O.......................................O

     170:......................OO.......................................O

     160:......................OO.......................................O

     150:......................OO.......................................O

     140:......................OO.......................................O

     130:......................OO.......................................O

     120:......................OO.......................................O

     110:......................OO.......................................O

     100:....................o.OO......................................oO

      90:....................O.OO......................................OO

      80:....................OOOO......................................OO

      70:....................OOOO......................................OO

      60:....................OOOOo.....................................OO

      50:....................OOOOO.....................................OO

      40:....................OOOOO.....................................OO

      30:....................OOOOO.....................................OO

      20:....................OOOOO.....................................OO

      10:..............o.....OOOOO.....................................OO

         +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---

          0  16  32  48  64  80  96 112 128 144 160 176 192 208 224 240

Summary of Contents for HG 73840ZB


































































Reviews:

No comments