Introduction
English, Revision 01, Date: 14.04.2009
5
2
Introduction
The described interpreter allows to connect two tracking antennas to one device.
The interpreter contains two identical channels with an independent setting of the filter
frequency. The output of the data is realized with a CAN bus. A CAN open protocol
(device profile DS 401) is implemented.
The parametrization can be carried out by a terminal programm (e.g. Hyperterm) us-
ing the serial interface or the SDOs of the CAN open protocol.
This documentation was written for hardware version 73350ZA2 and software version
73350A01.14 (or higher).
Components
At the time this manual was printed, the interpreter can be combined with the following
antennas:
-
G 19200ZC
-
G 19200YC
-
G 19210ZA
Technical informations in PDF format about these antennas can be found on our web-
site
