Gossen MetraWatt SECULIFE ST PRO Manual Download Page 107

Page: 107 / 114

GMC-I Messtechnik GmbH

107

14.2

List of Suitable Barcode Readers and RFID Scanners with
USB Port

The following devices have been tested for use with the test
instrument. We are unable to offer any guarantees regarding use
with other devices.

•

Z751A barcode reader

•

Z751E RFID scanner (programmer)

14.3

Use of USB Storage Devices

USB flash drives must be directly connected to the test instru-
ment for various device functions (see sections 3.8 and 5.2).

The connected USB storage medium must fulfill at least the fol-
lowing requirements in order to be used with your test instrument:

•

The file system on the USB flash drive must be FAT formatted
(FAT32). NTFS and exFAT file systems, for example, are not
compatible.

•

Maximum current consumption of the USB storage medium
via the USB port may not exceed 500 mA.

•

Do not use USB storage devices with encrypting functions.

Furthermore, make sure that the USB drive includes an LED dis-
play which indicates whether or not write operations have been
completed.

List of recommended (tested) USB flash drives:

•

Philips USB flash drive Snow Edition USB 3.0
(tested size: 64 GB)

•

Toshiba TransMemory-MX U361 USB 3.0
(tested size: 64 GB)

•

Corsair Flash Voyager Vega USB 3.0
(tested size: 16 GB)

•

SanDisk Cruzer Glide USB 2.0/3.0
(tested size: 64 GB)

Summary of Contents for SECULIFE ST PRO



















































































































Search results

Summary of Contents for SECULIFE ST PRO

Reviews:

Gossen MetraWatt SECULIFE ST PRO, Manual, Page: 107 / 114

Search results

Summary of Contents for SECULIFE ST PRO

Reviews: