9
PROFITEST H+E EASY CHECK
Gossen Metrawatt GmbH
6.5
Relevant Standards
The instrument has been manufactured and tested in accordance with the follow-
ing safety regulations:
IEC 61010-1
EN 61010-1
VDE 0411-1
Safety requirements for electrical equipment for measure-
ment, control and laboratory use – general requirements
EN 60529
VDE 0470, part 1
Test instruments and test procedures
Degrees of protection provided by enclosures (IP code)
DIN EN 61326-1
VDE 0843-20-1
Electrical equipment for measurement, control and laboratory
use – EMC requirements – Part 1: General requirements
EN 55022
Information technology equipment – Radio disturbance char-
acteristics – Limits and methods of measurement
DIN EN 61000-4-2
VDE 0847-4-02
Electromagnetic compatibility (EMC) –
Part 4-2: Testing and measurement techniques –
Electrostatic discharge immunity test
DIN EN 61000-4-3
VDE 0847-4-03
Electromagnetic compatibility (EMC) –
Part 4-3: Testing and measurement techniques – Radiated,
radio frequency, electromagnetic field immunity test
DIN EN 61000-4-4
VDE 0847-4-04
Electromagnetic compatibility (EMC) –
Part 4-4: Testing and measurement techniques –
Electrical fast transient/burst immunity test
DIN EN 61000-4-5
VDE 0847-4-05
Electromagnetic compatibility (EMC) –
Part 4-5: Testing and measurement techniques –
Surge immunity test
DIN EN 61000-4-6
VDE 0847-4-06
Electromagnetic compatibility (EMC) –
Part 4-6: Testing and measurement techniques – Immunity to
conducted disturbances, induced by radio frequency fields
DIN EN IEC
61851-1
VDE 0122-1
Electric vehicle conductive charging system –
Part 1: General requirements