manualshive.com logo in svg

Gossen MetraWatt PROFITEST H+E EASY CHECK, Operating Instructions Manual, Page: 10 / 28

Share
Download
Gossen MetraWatt PROFITEST H+E EASY CHECK Operating Instructions Manual Download Page 10

7

PROFITEST H+E EASY CHECK

Gossen Metrawatt GmbH

6

The Instrument

6.1

Functions Description

The instrument presents laypersons with the possibility of safely checking the func-
tionality of AC charging points without the need for the direct involvement of quali-
fied personnel.

Qualified personnel only need to be summoned for further action (e.g. repair) in the 
event that a malfunction has actually been confirmed.

6.2

Device Characteristics

• The instrument can only be used to test AC charging points in charging mode 3.

• The instrument simulates the charging socket of the electric vehicle. It can be 

connected to the charging socket or the type 2 plug of an AC charging point.

• During the automatic program sequence, the instrument checks values for 20 

and 32 A cables. 

6.3

Scope of Delivery

Please check for completeness.

1

PROFITEST H+E EASY CHECK (M525F)

1

Charging cable (micro USB plug)

1

Operating instructions

Summary of Contents for PROFITEST H+E EASY CHECK





























Reviews:

No comments