GOSSEN-METRAWATT
27
10.5 Lamp in the probe
The probe (9) is fitted with a lens type lamp of 2.5 V/0.2 A
with an E10 cap. Replace an unserviceable bulb as follows:
í
Completely disconnect the tester from all external cir-
cuits.
With a screwdriver, undo the screw with which the white
cover cap is fastened to the probe and remove the cap.
í
Replace the light bulb with a new one.
í
Replace the cover cap on the probe.
10.6 Case
Special maintenance of the case is not required. Take care
that the surface between the connection sockets is clean.
Use a slightly moist cloth for cleaning. Avoid the use of
cleansers, abrasives or solvents.
11
Repair and Replacement Part Service
When you need service, please contact:
GOSSEN-METRAWATT GMBH
Service-Center
Thomas-Mann-Straße 20
90471 Nürnberg, Germany
Phone +49 911 86 02 - 410 / 256
Fax
+49 911 86 02 - 2 53
This address is for Germany only. Abroad, our representa-
tives or establishments are at your disposal.
12
Product Support
When you need support, please contact:
GOSSEN-METRAWATT GMBH
Hotline Produktsupport
Phone +49 911 86 02 - 112
Fax
+49 911 86 02 - 709