GMC-I Messtechnik GmbH
13
8
Voltage Measurement
➭
Turn the function selector switch to V
.
➭
Connect the measurement cable as shown. Terminal „ “
should be grounded and the second measurement cable
with a higher potential connected to Terminal „V“.
Note!
The 400 mV
~
measuring range can only be selected
manually with the „AUTO/MAN“ key!
Attention!
!
Ensure that the current ranges („mA“ or „A“) are deactivated
and that the measurement cables are connected with the cor-
rect terminals „V“ and „ “
before connecting your multi-
meter for voltage measurement! If the limit values for
fuse tripping are exceeded due to an operating error,
both the operator and the instrument are in danger! Ob-
serve the voltage limit values printed on the multimeter!
➭
Select the respective voltage type (AC or DC) which corre-
sponds to the measuring value by briefly pressing the yel-
low multifunction key. Each activation of the key causes
alternate switching between AC and DC, as well as ac-
knowledgment by means of an acoustic signal.
The symbols DC and AC indicate the selected voltage type on
the LCD display.
After selection of this function with the selector
switch, the voltage type DC is always activated.
P$
9
