48
GMC-I Messtechnik GmbH
Device and Measuring Parameters
6
Device and Measuring Parameters
The instrument’s “
SET
” mode (menu mode) makes it possible to
set operating and measuring parameters, query information and
activate the interface.
Ð
The menu mode is accessed by pressing the
MEASURE | SETUP
key, assuming that the instrument is switched on and set to
“Measure” (measuring mode operation). “
1nFo
” appears at the
display.
Ð
By repeatedly pressing the
key (in any direction), ac-
cess is gained to the following main menus: “
store
”, “
send
” and
“
set
”, and the display is finally returned to“
1nFo
”.
Ð
After selecting the desired main menu, the respective sub-
menu is accessed by pressing the
FUNC | ENTER
key.
Ð
The desired parameter is selected by repeatedly pressing the
key.
Ð
In order to check or change a parameter, acknowledge it with
the
FUNC | ENTER
key.
Ð
The
keys can be used to position the cursor at the entry
position. The desired value is selected with the help of the
keys.
Ð
Changes can only be applied with the
FUNC | ENTER
key.
Ð
After pressing the
ZERO | ESC
key, the display is returned to the
submenu without making any changes, and by pressing the
ZERO | ESC
key once again, to the main menu etc.
Ð
You can switch to the measuring mode from any menu level by
pressing the
MEASURE | SETUP
key.
After repeatedly pressing the
MEASURE | SETUP
key (without first
turning the multimeter off), you can return to the last selected
menu or parameter from the measuring mode.
Example: Setting Time
1nFo
...
set
...
t
iME
...
set
10
:
24
:
48
(hh:mm:ss)
Setting hours and minutes:
Advance to desired entry position.
Change the setting, the entry position blinks.
Press and hold the key to change the setting rapidly.
The new time setting is activated after acknowledg-
ment.
MEASURE
SETUP
FUNC
ENTER
FUNC
ENTER
FUNC
ENTER
FUNC
ENTER