Operating Instructions
PROFITEST H+E BASE, H+E BASE 32, H+E BASE C
Page
2
Basic Safety Precautions
Guarantee
No guarantee is made with regard to function and safety unless the warnings and safety
precautions included in these operating instructions are observed.
GMC-I Messtechnik GmbH assumes no liability for personal injury or property damage which
occurs due to non-observance of the warnings and safety precautions.
Use for Intended Purpose
The diagnostics unit is intended exclusively for examining the functional performance of
charging stations for electric vehicles (mode 3 charging) with
•
type 2 connector socket for PROFITEST H+E BASE, H+E BASE 32 or H+E BASE C,
•
type 1 connector socket for H+E BASE C.
Use for other purposes is prohibited.
Target Group
Only trained, qualified electricians may use the PROFITEST H+E BASE, H+E BASE 32 and/or H+E
BASE C diagnostics unit.
Trained, qualified electricians fulfill the following requirements:
•
Knowledge of general and specific accident prevention regulations
•
Knowledge of applicable electrotechnical regulations
•
Training in use and care of appropriate safety equipment
•
Ability to recognize hazards associated with electricity
Warning!
Danger!
The diagnostics unit may only be used at charging points which are tested in accordance with
VDE 0100.
The unit is intended solely for the purpose of diagnostics and
cannot
be used as a substitute for a
corresponding test instrument!