SWING LEGS
BACKSTOP
2 - PHILLIPS PAN HEAD
** FOR CHILDREN AGES 3-11**
1 - SMALL SCREWDRIVER
SWING BEAM
RED LOOP OF NET
BACKSTOP TO THE SWING LEGS HERE
USE SCREWS PROVIDED TO ATTACH THE
(07-0025) Basketball Hoop
**FOR RESIDENTIAL USE ONLY**
OR BACK STOP.
4) DO NOT ATTACH ANY PET LEASHES, ROPES, CHAINS, CORDS OR ANYTHING ELSE TO THE BASKETBALL HOOP, NET
2) DO NOT HANG FROM THE HOOP OF THE BASKETBALL GOAL.
3) DO NOT USE THE BASKETBALL GOAL WHILE CHILDREN ARE SWINGING ON THE SWINGS.
SCREWS 1-1/2" LONG
5) DO NOT PUSH OR PULL ON THE BACK STOP WITH YOUR HANDS OR ANY OTHER ITEM.
SAFETY WARNINGS TO REVIEW WITH YOUR CHILDREN:
1) DO NOT HANG FROM THE NET OF THE BASKETBALL GOAL.
HARDWARE INCLUDED
1) ATTACH THE NET HOOKS TO THE RIM. PUT THE BACKSTOP IN YOUR LAP. PUT ONE FINGER INSIDE THE HOOK WITH THE HOOK
SPLIT OPENING FACING THE RIM. GRAB THE SMALL TAB ON THE HOOK WITH YOUR OTHER HAND AND PULL. THE HOOK SPLIT
OPENING SHOULD PULL APART. NOW PUSH DOWN TO SNAP IT ON THE RIM. REPEAT THIS FOR 8 HOOKS. ATTACH THE RED LOOPS
OF THE NET TO THE TABS ON THE HOOKS. THERE SHOULD BE TWO EXTRA HOOKS INCLUDED SHOULD ONE BECOME BROKEN.
2) PLACE THE BASKETBALL BACKSTOP AGAINST THE LEGS OF YOUR PLAY SET. LINE UP THE HOLES OVER THE CENTER OF THE PLAY
SET LEGS.
3) FASTEN THE BACKSTOP TO THE LEGS WITH THE SCREWS PROVIDED. YOU MAY USE THE SCREWDRIVER PROVIDED OR YOU MAY
USE YOUR OWN.
HOOK
KIT CONTENTS:
1 - BASKETBALL HOOP
ASSEMBLY (BACKSTOP AND
HOOP)
1 - NET
1 - HARDWARE KIT
1 - AIR PUMP
1 - AIR NEEDLE
1 - BASKETBALL (ABOUT 6-1/2"
DIAMETER INFLATED)
10 - NET HOOKS
GRAB SMALL TAB ON
NET HOOK WITH YOUR
OTHER HAND AND PULL
RIM (HOOP)
NET HOOK
!! WARNING !!
DO NOT USE ANY BALL OTHER THAN THE
BALL THAT IS SUPPLIED. FAILURE TO HEED
THIS WARNING MAY RESULT IN PRODUCT
DAMAGE.
