7
MDE-LEDI-NETWORK-TDS-4099V1.0
2. QUICKSTART
CONTENT OF THE PACKAGE
Upon delivery, the box should contain the following elements:
►
The 19" rack, bearing the mention ”LEDI
®
NETWORK TDS”
►
A C13 power supply cable without locking
►
An RJ45 Network cable
►
A DVD-ROM that contains software and documentation
☛
Please contact the customers service if one of the items above is
missing
CONNECTING THE SERVER
It may be useful to write down the serial number written on the identification stamp of the
1u 19” rack.
►
Connect the synchronization outputs to the devices to be synchronized (see Appen-
dix A – Connections).
►
Connect the LEDI
®
NETWORK TDS V1 server to the network using the network
cable.
NOTE: It is possible to connect the server directly to a computer using a
crossed network cable for settings/tests purposes.
►
Connect the power supply cable to the server and switch ON to start it.
►
The servers starts. The process may take up to one minute.
NOTE: initialization of the server is slower and may take up to three minutes
if there is no network cable connected.
►
By default, the server is set up to get its IPv4 and IPv6 addresses from a DHCP
server. If such a server is present on the network, the LEDI
®
NETWORK TDS V1 is
can be accessed directly. Press any arrow key to display the IP Addresses on the
server’s LCD front screen.
►
The GT Network Manager software (available on the DVD-ROM) can also detect
the server on the network and display the IP addresses.
ENGLISH