manualshive.com logo in svg

Gorgy Timing LEDI NETWORK TDS V1, User Manual, Page: 20 / 68

Share
Download
Gorgy Timing LEDI NETWORK TDS V1 User Manual Download Page 20

20

MDE-LEDI-NETWORK-TDS-4099V1.0

5. WEB 

INTERFACE

5.1. PRESENTATION

The LEDI

®

 Network TDS V1 can be configured and supervised through a WEB interface. 

This interface provides you with the following features:

 

►

Management of network parameters

 

►

Management of SNMP parameters

 

►

Management and diagnostic of server software itself

 

►

Management and diagnostic of output cards

Each LEDI

®

 Network TDS V1 has its own WEB server that delivers WEB pages.

 

►

To access the WEB site, type-in the address of the device in the address field of your 

WEB browser (as shown below) and validate the input.

 

►

To access the server via its IPv6 address, you have to type it between brackets

 

►

It is better to always use the most up to date web browser versions, in order not to 

experience display compatibility issues

5.2. WEB INTERFACE DESCRIPTION

5.2.1. Navigation menu 

The index page appears when accessing the WEB interface of the LEDI

®

 Network TDS 

V1.

Each time this icon :   is shown, the user can hover it with the mouse to get additional 

information about the concerned field.

Summary of Contents for LEDI NETWORK TDS V1





































































Reviews:

No comments