MDE-LEDI-NETWORK-TDS-4099V3.0
55
E
NG
LI
S
H
5.2.8. "Input" Page
The input page regroups information and settings about the time base and the time input
available on the
LEDI
®
Network TDS
.
Time Base
State
►
This field provides information about the type of oscillator and the current accuracy of
the time base in relation to the synchronisation input. For example, when the
LEDI
®
Network TDS
is switched on, the time base needs time to control its oscillator. The type
of synchronisation source also influences this value.
Current Frequency Source
►
This field indicates that the
LEDI
®
Network TDS
works with its own oscillator, not with
an external frequency input.
Enable autonomous mode
►
This box allows you to switch the ser
ver to “Free Running” mode, where it will
autonomously run a synchronisation source. When this box is checked, the following
options appear.
