Gorgy Timing LEDI Network IN, User Manual

Page: 72 / 116

72 MDE-LEDI-NETWORK-IN-4065V1.0
4.2.3. SNMP setup
When you click the SNMP button, the SNMP parameters are displayed as shown below:
The very standardized SNMP protocol provides a means to get information and alarms
from the LEDI Network IN.
8
Access to these information (the MIB) can be “protected” by
a keyword that is the Community Name .
Alarms are sent to a SNMP browser localized on a computer identified by its IP ad -
dress. Up to 5 IP Trap address can be specified that allows the alarm monitoring from
5 different computers.
Last, the SNMP related name, location and contact could be configured in this screen.
These information are stored in the system branch of the MIB and can be displayed in
a SNMP browser or in the
GTNetMng
tool (see part 31.2).
For convenience, alarms can be notified through the SYSLOG protocol that is more
often implemented under UNIX
®
.
8/ See part 6 for more information about SNMP
4. WEB INTERfaCE