Gorenje SBR 1000 DV, Instruction Manual

Page: 49 / 120

49
Using the attachments
WARNING: Use extreme caution when handling the blades. They are extremely sharp.
IMPORTANT: The food processor unit will not operate if the swivel head is not locked securely.
1. Place the blade (17, 18, 19, 20, 21, 22) of your choice on the blade holder (23).
2. Place the glass bowl (7) onto the glass bowl housing on the unit. Insert the spindle (8) on the
shaft of the glass bowl. Insert the blade holder (23) over the shaft of the spindle.
3. Place ingredients to be processed in the glass bowl (7).
4. Check the seal (11) is fitted to the lid correctly (fit the grooved side of the seal into the lid)then fit
the lid. Insert food pusher (14) into feed chute (13).
5. Ensuring the speed control is in the OFF position, turn the swivel head clockwise and press down
until it clicks shut to lock securely. The processor will not operate if the head is not located
correctly.
6. Switch on and select a speed.
7. When finished processing the ingredients,
PLEASE turn the speed control knob to the OFF
position. Then press the opening button (3) to unlock the swivel head. You can not unlock the
swivel head unless you turn the knob to the OFF position.
8. Reverse the above procedure to remove the lid, attachment and bowl. To release the lid, hold
one of the bowl handles whilst lifting the lid by the feed Tube (13)
9. For your safety, keep the pusher(14) in its place while operating the appliance.
Product Quantity Recommended level
Carrots 500g 1 - 3
Radish 500g 1 - 3
Squash 1000g 1 - 3
Cucumber 1000g 1 - 3
Cheese 500g 1 - max
Potato 500g 1 - 3
WARNING: Please use the big blade holder (24) for the big fries blade (25). Please use the other blade
holder (23) for the rest of the other blades (17, 18, 19, 20, 21, 22).
Hints

Use fresh ingredients

Don‟t cut food too small. Fill the width of the feed tube fairly full. This prevents the food from slipping
sideways during processing.

When using the chipper plate, place ingredients horizontally.

When slicing or shredding: food placed upright comes out shorter than food placed horizontally.

There will always be a small amount of waste on the plate or in the bowl after processing.

Store the plates in the storage compartment.
Dough tool (15)

Place the dry ingredients in the bowl and add the liquid down the feed tube whilst the machine is
running. Process until a smooth elastic ball of dough is formed this will take 20 - 30 secs.

Re-knead by hand only. Re-kneading in the bowl is not recommended as it may cause the
processor to become unstable.