Gorenje SBR 1000 DV Instruction Manual Download Page 47

Page: 47 / 120

Important instructions

Before using the appliance, read carefully the following operating instructions.

For your protection, SBR 1000DVfood processor has a swivel head system. It canot run unless the
swivel head is locked and the swivel head cannot be opened unless the On/Off knob (4) is turned to
the Off position. To open the swivel head press the swivel head opening button (3).

To use your food processor

1. To fit the quad knife blade, first fit the drive shaft (8) onto the metal pin in the bottom of the bowl.

Then assemble the knife blades (9,10) in the order shown _ taking care to rotate the top blade
clockwise until it fits fully into place. Then fit the knife blade assembly onto the drive shaft inside
the bowl. To remove, grip the assembly by the top of the drive shaft and remove the entire blade
assembly from the bowl. To separate the quad knife blade, take extra care to hold each section
by the plastic component and rotate the top blade anticlockwise until it becomes free from the
bottom blade.

2. Place the glass bowl (7) onto the glass bowl housing on the unit. Insert the spindle (8) onto the

shaft of the glass bowl. Insert the main blade (9) over the shaft of the spindle (8) and insert the
upper blade (10) over the main blade (9) properly.. Always hold the chopping blades by the upper
plastic part.

3. Place ingredients to be processed in the glass bowl (7).
4. Check the seal (11) is fitted to the lid correctly (fit the grooved side of the seal into the lid) then fit

the lid. Insert food pusher (14) into feed chute (13).

5. Ensuring the speed control is in the OFF position, turn the swivel head clockwise and press down

until it clicks shut to lock securely.

The processor will not operate if the head is not located

correctly.

6. Switch on and select a speed.

Use the pulse control for short burst. The pulse will operate for as long as the button is held
down.

The swivel head cannot be unlocked unless the speed control is in the OFF position.

7. Keep hand and utensils away from the chopping blades while chopping food to reduce the risk of

severe injury or damage to the food processor. A scraper may be used, but ONLY when the food
processor is not running and has been unplugged.
Never feed food by hand. Always use the food pusher.

8. When finished processing the ingredients, PLEASE turn the speed control knob to the OFF

position. Then press the opening button (3) to unlock the swivel head. You can not unlock the
swivel head unless you turn the knob to the OFF position.

9. Reverse the above procedure to remove the lid, attachment and bowl. To release the lid, hold

one of the bowl handles whilst lifting the lid by the feed Tube (13)

10. Do not leave the appliance unattended when it is in the »ON« position.

Important



Your processor is not suitable for crushing or grinding coffee beans, or converting granulated sugar

to caster sugar.



When adding almond essence or flavouring to mixtures avoid contact with the plastic as this may

result in permanent marking.