Gorenje RKI 5294 W Operating Instructions Manual Download Page 3

Instructions for Use

11

Description of the Appliance

                               

Refrigerator (A)

Refrigerator is used for storing fresh foods for few days.

Shelf (1) -

It applies to the appliances using sliding technics

 

(number

depends on the model)
Shelf can be optionally placed on the guides inside the
appliance. It is protected against pulling out. If you want to
remove it, slightly lift up the back part and pull it out.
Glass shelves (some models only have them) are protected
with plastic spacers. Before pulling the shelf out, spacers must
be moved towards you. Spacers can be also removed,
however, it is better to keep them for any later transport.
Quickly perishable food should be stored on the back i.e. the
coldest part of the shelves.

Shelf (1) -

It applies to the appliances with shear-type hinges

 

(number

depends on the model)
The shelf can be set at any height inside the appliance. With
enclosed caps (in bag with instructions) you can cover any
unused hollow spots on walls inside the appliance, intended for
setting of shelf support plugs.
The shelf is protected against pulling out and tipping over. If
you would like to remove it from the appliance, slightly lift the
front end and pull it out. After that remove the support plugs , fit
them in required positions and set the shelf back.

Keep all fast perishable food on the rear side of the shelf where
the temperature is the lowest.
When keeping higher objects in the refrigerator, lift up the front
of shelf and let it drop beneath the rear part (two setting
positions possible – right below the shelf or lower). When
removing divisible shelf, remove each section separately.
When the appliance has guides instead of plugs, the shelf can
also be optionally set on guides. The shelf is protected against

pulling out. If you wish to remove it, slightly lift the rear end and
pull it out of the appliance.

Bottle support

(in some models only)

Bottle support (number depends on model) is intended for
bottle keeping. It is protected against pulling out and so you
can remove only empty one by lifting up the front end and pull
it toward you.
At appliances with shear-type hinge lift it in the front part and
pull it out towards yourself.

Warning!

If the door contains storing shelves, install the rack in such
position that the length of the bottles will not hinder the closing
of the door.
The rack may carry 9 bottles of 0,75 l or more at the maximum
(total weight max. 13 kg) – note the label underneath the
thermostat box inside the appliance.

Defrost Water Outlet (2)

The interior of the refrigerator is cooled with cooling plate
incorporated in the rear wall. Under the plate there is a channel
and an outlet for defrost water.
Regularly check the defrost water outlet and the channel,
because they should never be clogged (as for example with
food rests). If clogged, use a plastic straw and clean it.

Fruit and Vegetable Container (3)

The container is on the bottom under the glass shelf and is
used mainly for storing fruits and vegetables. It provides
adequate humidity which has favourable effect on food stored
(less dehydration).

Downloaded from Fridge-Manual.com Manuals

Summary of Contents for RKI 5294 W








Reviews: