Instructions for Use
6
Location and Installation
Selecting the right location
♦
Place the appliance in dry and regularly
ventilated room. Allowed ambient
temperature depends on the model
(class) of the appliance and is declared
on the rating plate of the appliance.
♦
Never place the appliance near heat
emitting devices (e.g. cooker, radiator,
water heater or similar devices) and do
not expose it to direct sunlight.
♦
The appliance should be positioned at
least 3 cm away from the electric or gas
cooker and at least 30 cm away from
the oil or coal stove. If this is not
possible, use an appropriate insulation.
Class
Ambient temperature
SN (subnormalni) od + 10°C do + 32°C
N (normalni)
od + 16°C do + 32°C
ST (subtropski)
od + 16°C do + 38°C
T (tropski)
od + 16°C do + 43°C
Positioning the appliance
♦
Place the appliance firmly on a solid
base. Some appliances have adjustable
feet on the front side; use them to level
the appliance.
♦
Two spacers attached to the appliance
must be fitted onto the upper edge of
the condenser, thus preventing the
appliance from being installed too close
to the wall. Spacers are manufactured
for all-purpose function depending on
the distance of the condenser from the
wall, therefore turn them accordingly
and fix them to the appliance.
Connection to Power Supply
♦
Using the power cord connect the
appliance to the power supply socket
outlet with a ground terminal (safety
socket). Required nominal voltage and
frequency are indicated on the rating
plate.
♦
The connection to the mains supply and
earthing have to be made according to
current standards and regulations.
The appliance will resist minor temporary
voltage tolerances, but not exceeding
-6 to +6 %.
Downloaded from Fridge-Manual.com Manuals