Instructions for Use
16
Troubleshooting Guide
Fault
Cause / remedy
The appliance does not operate
after connection to the mains
•
Check if there is power in the socket and if the
appliance is switched on.
Cooling system operates without
interruption
•
Check adequacy of air circulation for sufficient
cooling of the compressor, and clean the
condenser.
•
Frequent opening of the door, door open too
long.
•
Door not closed properly (particle between door
gasket, sagged door, check gasket sealing,
etc...).
•
Excessive quantity of fresh food inserted at
once.
•
Insufficient cooling of the compressor and
condenser, clean the condenser.
Excessive ice formation at the
rear interior wall of the
refrigerator
•
Bad door sealing; clean or replace the gasket if
dirty or damaged.
•
Frequent opening of the door, door open too
long.
•
Inserting hot food in the refrigerator.
•
Food or dishes touch the rear wall of the
refrigerator.
Water dripping from the
refrigerator
•
Drain outlet clogged, water drips past the
collection groove.
•
Clean the clogged outlet hole with plastic straw.
•
Thaw thick ice deposits manually (see Manual
defrost).
Red light is on
•
Frequent opening of the door, door open too
long.
•
Door not closed properly (particle between door
gasket, sagged door, damaged gasket, etc...).
•
Long power failure.
•
Excessive quantity of fresh food inserted at
once.
Downloaded from Fridge-Manual.com Manuals