Instructions for Use
11
Mounting Instructions
Mounting instructions for refrigerating and
freezing appliances are for qualified
technicians only. Appliance should be
mounted and installed in compliance with
these instructions, current standards and
regulations. Mounting instructions were
prepared for various types/models of
appliances, therefore they may describe
some procedures that do not apply to your
appliance.
Mounting Dimensions and Required Air
Circulation
The rear wall of the appliance is getting
warm during the operation of the appliance
(and water is evaporating from the drain pan
on the compressor). You must therefore
provide for adequate air circulation on the
rear of the appliance.
•
At the base of the kitchen unit intended
for building in the integrated appliance,
there should be at least 200 cm² free
space, for adequate air circulation.
•
On the upper part of the appliance the air
is coming out, so try not to cover the
opening for the outflow air.
A (mm)
B (mm)
575
575-580
875
875-880
1025
1025-1030
1225
1225-1230